• The RS-BA1 allows you to use the radio installed in another room using your home network or
even from a remote location over the Internet.
• Low voice latency (caused by the RS-BA1) provides the same operational experience as using an actual radio.
Advanced Remote Control Interface Tailored to Icom Transceivers
• Most functions and modes of your transceiver, including interference rejection functions and IF filter settings,
can be controlled. Also, S-meter and SWR can be observed.
• Rx Voice recording function.
❍ The RS-BA1 consists with two component software
applications; System configuration software and remote
control software. The system configuration software sets
up IP address, audio sampling rate and other settings. The
remote control software provides a user interface, similar to
the radio's front panel, and allows you to control the radio
from a remote location.
❍ The IC-7600, IC-7200 or IC-9100 can be connected to a PC
with a USB cable and the input/output audio signal and
CI-V command is sent through the USB cable.
❍ The IC-7800 or IC-7700 can be connected to a PC with a
RS-232C cable plus S/P DIF or ACC cable.
Standard accessories: USB cable (to connect the PC side radio with a radio with USB port).
1 - It 's plans to release an updated firmware for the radio with USB port for a better use of new features. Details will be announced in the future.
2 - The latency values below do not include those due to the network.
3 - The driver compatibility with 64-bit version is still being finalized
(Windows only accepts 7-64bit drivers with verified digital signature)
4 - Details of the IP features are still needed to be determined. - A basic knowledge of IP / router setting is essential to make the set up of the RS-BA1 and the use of a standard IP network.
5 - These figures do not include the latency of the network.
- Brand: Icom
- Product Code: Icom RS-BA1
- Availability: 2-4 Days
- Ex Tax: €56.98
Tags: Icom RS-BA1