EAntenna 50LFA6s (11,97 dBi – 25,41 dB F/B)

The EAntenna LFA antennas for 50 MHz represent the largest development in antennas with moderate boom length for a single performance.
This performance is characterized in that:
You can listen to very low signals without noise QRM and QRN alter audio clarity.
Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines. (You can request an optional cable terminated with connector and soldered PL-UHF, N or BNC on the end if required)
The bandwidth covers the entire band with low SWR.
The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.
Its ratio of F/B is high, since only antenna boom lengths can get exaggerated.
The gain is comparable with other models of antennas always larger in dimensions.

Specifications 50LFA6s
35x35mm square boom.
Telescopic elements in 2 sections; central 13mm diameter and 10mm tips, except LOOP made in 6mm.
250x100mm mast plate with 6mm thick and square U-bolts M6 to attach to the boom and M8 U-bolts to the mast.
Features of the 50LFA6s
If you have tried with and 5 elements antenna in this band and looking to have a status in the band … Why not one EAntenna 6 elements?
With 50LFA6s you can get some more gain 50LFA6 regard to the detriment of the selectivity of listening stations in a single direction, but something desirable for many people with antennas of this size.
With this lobe as the antenna, the noise will not be problem for you. Width without noise, symptom of adjacent noise levels.
Simple and quick, because the boom joints are very easy to assemble. And the elements are attached by DIN 912, M3 and Hose Clamp the adjustable elements for fast installation and durable fastening.
Antenna very solid construction, and a very acceptable weight.
Available for stack 2 or 4 units in a short (under table include phasing), and to make a profit no big antenna can get.