Ham Radio CB Shop    Wij maken uw hobby betaalbaar

When developing the DXP Sound andCAT interfaces, microHAM had two major goals:


better decoding by using an up-to-date 24 bit audio architecture

very simple setup and configuration

microHAM DXP

Zoom

    

microHAM's DXP interface uses a 24-bit AD converter to digitize the received audio signal. The subsequent processing of the data also takes place with this very high resolution. The result is a much larger dynamic range, i.e. the ability to discern even very small signals with the simultaneous presence of very loud signals safely and reliably. This results in improved decoding even under difficult circumstances, for example with a large number of FT-8 signals simultaneously. This very high resolution is particularly useful for phase modulated signals such as FT-8, JT65 or PSK-31.


Another innovation from microHAM is the consistent use of standard-compliant USB device classes for the interface. This means that the DXP no longer needs its own drivers on current operating systems, as they are all already available. This applies to Windows from version 7 on as well as to current MacOS and Linux versions. The formerly common 'urouter' software from microHAM is no longer needed, the setup is done via the easy to read OLED display on the DXP interface. As a further simplification, the manufacturer has replaced the earlier used jumpers with electronic switches. The DXP interface can easily be used with various transceivers: Ready-made cables for over 20 different transceiver types are available for connection to the radio.


But of course the DXP interface can do more than just digital modes such as RTTY and FT-8. A CAT interface with level converter is built in for all common radio types. Here, too, the consistent galvanic isolation between radio and computer is used, which ensures that no ground loops can occur. Furthermore, the latest WinKey chip from K1EL is installed, which makes it easy to key the transmitter in telegraphy with high precision. The memories of the keyers are easily accessible via the large keys on top of the DXP. Furthermore there is the possibility to connect an external USB keyer to recall memories. Of course you can also use a telegraphy paddle. One PTT input and one PTT output offers everything you need for integration into your own station, even if you are using a power amplifier.


Features of the DXP interface

USB 2.0 connection to computer, just ne cable

Power supply over USB, no extra power supply required

Existing DB15-xxx cables can be used with DXP

COmplete galvanic separation between radio and computer

24 bit audio: high dynamic range, low noise

USB class driver, no special drivers required

RTTY, SSTV, FT-8, PSK-31, JT65, WSPR…

Morse telegraphy (CW) with K1EL Winkey Chip V3

CAT interface for Icom, Kenwood, Yaesu, Elecraft, TenTec and more

White OLED display

TX and RX level adjustable from front panel

Morse keyer speed adjustable from front panel

Very easy setup, no jumpers

Connector for optional USB keyboard

Input for PTT foot switch

Output for PTT control of an amplifier

Connector for iambic morse key (paddle)

Size and weight: 150 x 105 x 30mm, 350g

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

microHAM DXP DXP 24-Bit Soundcard Interface

  • Brand: MicroHam
  • Product Code: microHAM DXP
  • Availability: 2-4 Days
  • €273.50

  • Ex Tax: €226.03

Related Products

microHAM USB CAT/Audio Interface II

microHAM USB CAT/Audio Interface II

The USB-II interface by microHAM is a USB interface for CAT and soundcard AF. This interface offers ..

€99.00 Ex Tax: €81.82

MicroHAM USB-III: CAT- and Sound Interface with soundcard

MicroHAM USB-III: CAT- and Sound Interface with soundcard

The USB-III CAT interface contains an own soundcard, which is connected via USB to the computer. So ..

€137.50 Ex Tax: €113.64

Tags: microHAM DXP