FTDX10

HF/50MHz 100W SDR Transceiver

Radio Features:

- HF/50MHz band 100W Transceiver

- Hybrid SDR configuration utilizing a Narrow Bandwidth SDR, and a Direct Sampling SDR

- Narrow Band SDR enables Phenomenal Multi-signal Receiving characteristics (2kHz RMDR 116dB+, 2kHz BDR

141dB+, 2kHz 3rd IMDR 109dB+)

- Down conversion, 9MHz IF Roofing Filters produce Excellent Shape Factor

- 250 MHz HRDDS (High Resolution Direct Digital Synthesizer) Ultra Low-Noise Local-Oscillator System

- 15 Separate Powerful Band Pass Filters (BPF)

- Effective QRM Rejection with IF DSP (IF SHIFT/WIDTH, IF NOTCH/DNF, CONTOUR, DNR, APF)

- High-quality and Super-Stable Final Amplifier utilizing the new push-pull MOSFET RD70HUP2

" - 5-inch Full Colour Touch Panel and 3DSS (3-Dimensional Spectrum Stream) Display"

- MPVD (Multi-Purpose VFO Outer Dial) enables Outstanding Operating Performance

- Quick Memory Bank (QMB)

- Supports CW operation with multiple functions such as: CW zero-in, CW Auto zero-in, CW Reverse, CW decode,

CW keying Signal form Shaping by FPGA and others

- RTTY (FSK)/ PSK Encode/Decode Function

- Other practical features such as Optional RF Gain Selection by IPO. Automatic Gain Control, Quick Split Function

- SD Card Slot

- Remote Operation via Internet with optional LAN-Unit (SCU-LAN10)

Supplied Accessories:

Microphone SSM-75E

DC Power Cable w/Fuse

Spare Fuse

6.3mm 3-contact Plug

Operating Manual

Specifications:

Frequency Ranges: RX 30kHz - 75MHz (Operating)

1.8MHz - 29.699999MHz (Specified performance, Amateur bands only)*

*5.1675/5.332/5.348/5.3585/5.373/5.405MHz (US only), 5.351500-5.366500MHz (EU

only)/ 5.25000-5.406500 (UK only)

50MHz - 53.999999MHz (Specified performance, Amateur bands only)

70MHz - 70.499999MHz (Specified performance, UK Amateur bands version only)

TX 1.8 – 54MHz (Amateur bands only)

70MHz - 70.49999MHz (UK only)

Modulation Type: A1A(CW), A3E(AM), J3E (LSB, USB), F3E(FM),F1B(RTTY),G1B(PSK)

Frequency Stability: ±0.5ppm (32°F to +122°F/0℃ to +50℃, after 1min)

Supply Voltage: DC 13.8V ±15%

Circuit Type: Double-Conversion Superheterodyne

Intermediate

Frequencies

1st IF 9.005MHz

2nd IF 24kHz

RF Power Output: 5W - 100W (CW, LSB, USB, FM, RTTY, PKT)

5W -25W (AM)

Case Size (W x H x D): 10.47 x 3.58 x 10.35(inch) / 266 x 91 x 263 (mm) *Protruding parts not included

Weight (Approx.): 13lbs/ 5.9kg