High-Class HF/50MHz 100W Transceiver – the FTDX101D, the first sample will be
seen at the Dayton Hamvention 2018. This information and the sample showed at Dayton are only the preliminary
introduction, further details such as pricing and date of release will be announced later.
The new FTDX101D will be endowed with the latest SDR Technology and classified as YAESU High-End HF line, the FTDX
series, which amateurs have come to know as synonym of superior quality.
A few of the remarkable features of the new FTDX101D are:
• YAESU High-Class HF/50MHz 100W Transceiver
• SDR Technology and waterfall display
• Large high precision colour touch display.
• Active Band Monitor enables rapid band changes with LED illumination of the operating band.
• Independent control of the Main and Sub Bands allows effortless operation for the serious contester needing to
move quickly between the amateur bands.
• High-Q VC Tuning Front-End.
• Main tuning dial for Main and Sub Band frequency control includes an Outer Dial for clarifier, VC Tuning, fine tuning
or custom settings.
As you may recall, the name “101” comes from the legendary-popular best seller FT-101 series. With all its strength, YAESU
produced this new HF transceiver to carry on the tradition of high quality known from the original 101 series.
At Yaesu, the '101' signifies the top-of-the-line series of HF transceivers. In the venerable tradition of the FT-101B, FT-101E, -101ZD from the 70s and 80s, Yaesu now continues this heritage with the FT-DX101D (100W) and FT-DX101MP (200W). The FT-DX101MP is dedicated to Sako Hasegawa, the founder of Yaesu Musen.
The technical design of the FT-DX101 is a fascinating hybrid of state-of-the-art direct sampling SDR technology and classic, proven down mixer technology. On the one hand the RF signal is directly sampled and digitized behind the pre-selector filters, as it is typical for a high-end SDR; on the other hand the signal coming from the same pre-selector is down-mixed to a 9 MHz IF, then digitized and processed at that stage. This double-tracked approach offers plenty possibilities: SDR typical features like a wide band (up to 1 MHz) spectrum and waterfall can be displayed, at the same time the typical close-in selectivity of a high-end receiver can be achieved without compromise. This classical receiver track uses roofing filter at the 9 MHz IF stage, the filter-width of 12 or 3 kHz or 600 Hz is either selected automatially or manually.
The excellent receiver capabilities are also supported by a complex pre-selector system. Yaesu has designed 15 fixed band pass filters, supported by a continously tuned variable capacitor filter (VC Tuning) is available. This VC filter is either tuned automatically or manually, it uses a miniature precision stepper motor. This filter claims up to -70dB attenuation of close-by, unwanted signals. The net result is an outstanding blocking dynamic range (BDR) of 150 dB at 2kHz signal spacing, at a dynamic range of 120 dB (RMDR, Reciprocal Mixing Dynamic Range).
To support all variants of DX traffic on HF the FT-DX101 has two equivalent and independent receivers (Main and Sub band). Each receiver is equipped with the well known Yaesu system for noise reduction and filtering. For example you can select individual notch and noise filters for each receiver, with separate, independent filter widths on top. The display can be switched to show two spectra and/or waterfalls at the same time, eitehr side by side or on top of each other. The two independent receivers offer the Yaesu-typical stereo AF output, you can have Main and Sub band separated on a stereo headphone. This can be very helpful when digging through a pile-up of a rare DX station working split.
The Yaesu FT-Dx101 is also a successful mix of proven and new ideas in terms of control elements. The legendary FT-1000MP transceiver already had a VFO knob with an additional outer tuning ring. This ring is now also found at the '101' and serves easily switchable functions: Fine tuning on the main VFO, tuning on the sub VFO, VC tuning and clarifier. The large, colored touch panel is used for many other functions that can be accessed via soft keys. By tapping on the spectrum you can change the frequency directly, tapping on the frequency allows a direct frequency input, etc. The display can be adapted to the personal taste in color and representation. Yaesu is also breaking new ground when it comes to band selection. The keys are clearly arranged next to each other and the 60 and 4m bands have their own keys. Coloured LEDs above and below the band keys indicate the respective assignment of the main and sub VFOs.
The FT-DX101 is offered in two flavours:
FT-DX101D: 100W transmit power, without power supply, requires 13.8V, 22A
FT-DX101MP: 200W transmit power, incl. ext. loudspeaker, incl. 48V power supply inside the loudspeaker case
Ohne Modifikation auf 60m sendefähig
Features and functions FT-DX101
160-10m + 6m + 4m
Hybrid-SDR: Direct Sampling + Down Mixer/SDR
100W Transmit Power (D Version)
200W Transmit Power (MP Version)
9MHz ZF Roofing Filter: 12 kHz, 3 kHz, 600 Hz
15 Band filters + continous tuning Pre-Selector (VC Tuning)
Two independent receivers
Operating Modes: LSB, USB, CW, RTTY, PSK, AM, FM (+ Data Modes)
18 Bit A/D converter
Very low noise 400 MHz local oscillator
7" colour LC display with touch function
Multi Purpose VFO Tuning Knob
±0.1 ppm TCXO
Automatic CW tuning
RTTY, CW, PSK31 Decoder
99 memories, 12-digit alpha-numerical memry names
5 or 10 quick memories
9 pairs of memories for scan edges
Built-in top speaker (D Version)
Separate loudspeaker in thesame design (MP Version)
Two USB connectors on front (keyboard etc.), one USB connector on the rear (CAT control)
SD card memory slot
DVI-D display connector
RS-232 serial interface
Yaesu FTDX-101D HF/50MHz 100W Transceiver ✅ + M-1 microphone ✅ 5 years warranty
- Brand: Yaesu
- Product Code: Yaesu FTDX-101D HF/50MHz 100W Transceiver + M1
- Availability: In Stock
- Ex Tax: €2,957.02