YAESU FTDX-5000MP + SM 5000
The Yaesu FT-DX5000MP Premium HF/50 MHz 200W Transceiver Series
The FT DX 5000 Series HF/50 MHz 200 Watt Transceivers are a new Premium Class of Yaesu radios with two Independent Receivers plus many unique options and accessories designed to meet the Performance Requirements of even the most demanding serious Amateur Radio operator.
NOTE: The FTDX-5000 can easily be modified to transmit on the 2200m band (136kHz), with a power of around 10mW. (Please contact your local dealer for more information)
FT DX 5000MP Description
SM-5000 Station Monitor – Included; 300 Hz Roofing Filter – Included; ±0.05ppm OCXO – Included.
Rugged 200 Watt Output Power
The FTDX 5000 robust and high-power Final Amplifier Stage incorporates two super reliable FET, VRF-150 (Drain-Source Voltage 170 V/Gate Source Voltage ±40 V, Total Device Dissipation 300 W) in a push-pull configuration, offers solid 200 W output (75 W Class A operation).
Internal Power Supply
All three FTDX 5000 Series radios have their own built-in power supply
TWO Totally Independent Receivers
All FTDX 5000 Transceivers include Two (2) Totally Independent Receivers to give you Performance and Flexibility previously only provided by much more expensive radios.
SUPERB 3rd-Order Dynamic Range & 3rd-Order Intercept Point (IP3)
SSB (2.4kHz BW)
10 kHz SEP.:106 dB, IP3 +40 dBm
CW (500Hz BW)
10 kHz SEP:112 dB, IP3 +40 dBm
2 kHz SEP. :105 dB, IP3 +36 dBm
1 kHz SEP. : 99 dB, IP3 +25 dBm
*VFO-A/Main Receiver @ 14 MHz, IPO1
Super Sharp “Roofing” Filters
Super sharp “Roofing” filters for VFO-A/Main Receiver.
Filters are Selectable between *300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF)
*300 Hz filter is optional for FTDX 5000 and FTDX 5000D. It is included in the FTDX 5000MP
High Performance Yaesu Custom-designed 32-bit Floating Point DSP
The legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (@300 MHz), one EACH for VFO-A and VFO-B.
Variable CW Audio Peak Filter & High/Low-Cut Filtering
Variable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology.
- CW Width: 50/100/150/200/250/300/350/400/450/500 Hz
- CW Pitch Frequency: 300~1050 Hz (10 Hz Steps)
True Analog Meter Precision
Enjoy the same Huge Size Metering System as the FT DX 9000 series with True Analog Precision and Instant Reaction Time.
New Function Displays for Ease of Operation
Three Electro Luminescence clear Displays included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu function.
IF Output Available
IF Output (9 MHz) from VFO-A/Main Receiver
Practical Level Indication System for Most Important Settings
The FTDX 5000 provides loads of practical Level Indication that clearly show settings of Mic-Gain / RF Power / CW-Pitch / Keyer Speed / Processor Level / VOX Delay Time / Break-In Delay Time.
-They can be controlled ON/OFF independently!
Introducing the SM-5000 Station Monitor Bandscope
If you need a good Bandscope to enhance your operations, you are going to love our all-new SM-5000 matching station monitor. Included with the Bandscope is a complete, enhanced stereo speaker system with superb audio quality - the speakers are point at you instead of up into the air above the radio!
Other Valuable Options
- Yaesu Data Management Unit DMU-2000, and utilize its powerful Audio Scope, Oscilloscope, Spectrum Scope, logging, and Rotator Control capabilities using your own personally selected and purchased computer display monitor.
- Yaesu External Fully-Automatic Micro-Tuning Units. Three modes available: A (160 m Band), B (80 & 40 m Bands), C (30 & 20 m Bands)
The Yaesu SM-5000 station monitor adds sophistication and new capabilities to the FTDX5000 series. It allows you to see a visual display of an amateur band segment tuned by the VFO-A receiver. The default bandwidth allows you to see both weak and strong signals clearly depicted on the screen. During transmission the transmitter's waveform will be displayed. Three different trace modes are selectable. The LBWS - Limited Bandwidth Sweep function provides very high speed signal detection over a limited portion of the currently displayed spectrum.
The SM-5000 also has an enhanced stereo speaker system with superb audio quality.
The front panel controls allow you to adjust the contrast, select speaker input, or mute speakers. Special side mounting plates are provided to secure this device to the top of the FTDX5000. The SM-5000 can be used with, or without the DMU-2000 (sold separately).
18.5 x 1.8 x 7.2 inches 5.5 lbs. (462x45x181mm 2.5kg).
YAESU FTDX-5000MP + SM 5000
- Merk: Yaesu
- Model: YAESU FTDX-5000MP + SM 5000
- Beschikbaarheid: 2-4 Dagen
- Excl. BTW: €3.270,25